OO9 / 009 Narrow Gauge "Gerry" Loco Body For Fleischmann 7000 chassis
£25.00
3D-Factory are pleased to present our OO9 / 4mm / 1:76 "Gerry" Freelance Narrow Gauge locomotive Body For Fleischmann 7000 / Ibertren Cuckoo chassis.
This locomotive is a freelance design drawing inspiration from Peckett & Sons.
Designed and printed in the UK with ABS like resin using cutting edge 3D printing and post processing processes.
This body kit consists of:
1 x OO9 / 4mm / 1:76 "Gerry" Freelance locomotive Body
1 x OO9 / 4mm / 1:76 "Gerry" Freelance locomotive Roof
1 x OO9 / 4mm / 1:76 Locomotive Detailing Pack* (Toolbox, Bucket, Oil Can, 2 x Lamp brackets, 2 x Lamps and 2 center buffers)
*Supplied on supports (pictured)
To complete you will require a Fleischmann 7000 / Ibertren Cuckoo donor chassis.
Modelling tools such as side cutters, sandpaper and needle files will be required to finish the model.
Always use appropriate protective equipment such as gloves, eye protection and dust mask when cutting and filing and painting resin prints
We recommend using good quality acrylic based primer and paints with an airbrush airbrush to paint the model, finished with a clear coat as it will help preserve the finer details of the model, although careful brush painting will yield good results.
Although no washing should be required prior to painting, we recommend using soapy water to remove any grease left from fingerprints to help with paint adhesion and ensure a great surface finish.
Ages 17+
Supplied unpainted and without chassis
#OO9_Locomotives
This locomotive is a freelance design drawing inspiration from Peckett & Sons.
Designed and printed in the UK with ABS like resin using cutting edge 3D printing and post processing processes.
This body kit consists of:
1 x OO9 / 4mm / 1:76 "Gerry" Freelance locomotive Body
1 x OO9 / 4mm / 1:76 "Gerry" Freelance locomotive Roof
1 x OO9 / 4mm / 1:76 Locomotive Detailing Pack* (Toolbox, Bucket, Oil Can, 2 x Lamp brackets, 2 x Lamps and 2 center buffers)
*Supplied on supports (pictured)
To complete you will require a Fleischmann 7000 / Ibertren Cuckoo donor chassis.
Modelling tools such as side cutters, sandpaper and needle files will be required to finish the model.
Always use appropriate protective equipment such as gloves, eye protection and dust mask when cutting and filing and painting resin prints
We recommend using good quality acrylic based primer and paints with an airbrush airbrush to paint the model, finished with a clear coat as it will help preserve the finer details of the model, although careful brush painting will yield good results.
Although no washing should be required prior to painting, we recommend using soapy water to remove any grease left from fingerprints to help with paint adhesion and ensure a great surface finish.
Ages 17+
Supplied unpainted and without chassis
#OO9_Locomotives
×
![Lightbox]()